I have an 05 road king that I converted into a ultra classic won't start, I've changed the main wiring harness added a overlay harness changed the ignition and bike won't start, started before I changed over i need help
The main wiring harness, overlay fairing harness, ignition was changed, I have a red security light on. The code that comes up is u1097 cleared code and comes back still won't startI think further clarification of what was converted is necessary to assist resolving the issue. What was converted?
It will not crank, has power to coilDoes it crank ?. If so is there power on the coils , to start with !.
Before we go further, let's clear some things up language wise. Won't crank and won't start can mean the same or different things to different people. If the engine turns over, it cranks. If the engine does "crank" squirt some gas or starting fluid into the mouth of the carb. or inj. body, and see if it starts momentarily. Also we'd like to know if it is carb. or F.I. Is your ign. switch still on the tank? You just changed a $#&*load of electrical components so the more we know, the less we will have to ask or give irrelevant answers. U1097 indicates a speedo/ecm communication error.
Bike won't do anything and yes I have power to all area needed coil, ecm, tssm, relays and all fuses are goodBefore we go further, let's clear some things up language wise. Won't crank and won't start can mean the same or different things to different people. If the engine turns over, it cranks. If the engine does "crank" squirt some gas or starting fluid into the mouth of the carb. or inj. body, and see if it starts momentarily. Also we'd like to know if it is carb. or F.I. Is your ign. switch still on the tank? You just changed a $#&*load of electrical components so the more we know, the less we will have to ask or give irrelevant answers. U1097 indicates a speedo/ecm communication error.
I'm at a loss I did ever thing I'm supposed to helpI have power every where I'm supposed to
The starter will turn over when jumped but the code is keeping it from startingWhat will it do ,if you put a wire from the batterie , directly on the starter . This ofcourse with the mainswitch in ON position.
Or when the starter-relais is "hotwired" ?
I did hotwire it, will crank/turn over when hot wiredWhat will it do ,if you put a wire from the batterie , directly on the starter . This ofcourse with the mainswitch in ON position.
Or when the starter-relais is "hotwired" ?