Harleydparts
Member
Hello all, need some help with start circuit problem. We are broke down in Buckeye Lake, Oh. The broke bike is a 2010 Street Glide trike. The problem started yesterday, turn the off/run switch to the run position and the starter engages and will not disengage. I had this problem last year with my bike and the fix was a new set of rocker switches. We were in Wv for a funeral and I did not have time to install a new set on her bike as we had to get back to work, I did get a set for it to install when we got home and had the time. No problem, I put the starter relay in, start the bike and pull the relay. We got 150 miles and the starter would not engage, just a click at the starter relay, nothing more. I figured the off/ run switch had done whatever and wouldn't let the starter solenoid kick in, I cut the wires from the switches and connected the new switches, I figured a running bike with a ball of wire wire tied to the handlebars was better than a non running bike. Didn't work, now I am at a loss. I do have a service manual with me but without being home to sit down with the manual and a multi meter and figure it out I'm out of luck. An iron head sportster or a shovelhead I could deal with, I don't have any experience with ecm's and God knows how many relays. Thanks for any help.