cdn-bigfoot
Junior Member
I have a TomTom Rider2 bike GPS. It came with the bike mount kit that includes a "hot shoe" mount that powers the GPS unit. I have wired it to a 12v accessory connector on my bike. I have used this set-up before with good charging and power to the unit. This year the GPS shows it is not being charged or powered by the hot shoe. The ground and positive meter out good from the connection to the plug that goes into the hot shoe. I have 12+v at the plug. Problem is the hot shoe is not charging the GPS unit. I've metered the 4 pushpin type connection points and they are showing minimal voltage.
Can someone with one of these units please meter the 4 pin connectors and tell me what they get to ground with their bike turned on?
I get the right 2 pins as being ground and no voltage or continuity to ground with the second pin from the left. The left end pin gives me 0.69 volts metered to ground. This doesn't seem right.
Can someone with one of these units please meter the 4 pin connectors and tell me what they get to ground with their bike turned on?
I get the right 2 pins as being ground and no voltage or continuity to ground with the second pin from the left. The left end pin gives me 0.69 volts metered to ground. This doesn't seem right.