schooner
Member
Hey Guy (Newbie In Lots Of Trouble)
I'm just spinning my front wheel. And its got LOTS OF ENDPLAY; WOBBLE call it whatever you want.
Man, I tried everything to put that front wheel on WITHOUT ENDPLAY and its just NOT HAPPENING :newsmile055:
Now I'm really screwed; got the bike on jack stands with no rear wheel either
I tried switching spacers but the both front ones are the SAME SIZE :small3d031:
That NUT on the Left Side of the wheel has been torqued to spec 55-60lbs.
I've taken the front wheel off so many times to try an figure out what heck I'm doing wrong. And I can SEE IT. That GAP won't go away.
If I puch the speedp side to right; it all looks good where the speed is. However, upon doing that I look over on the Left Side of the wheel that there's a LARGE GAP.
There's one picture there where the speedometer was hook-up correctly - THAT'S BEFORE i TAKE IT APART FOR THE NEW TIRE TO GO ON - I should've left it alone.
Now I got to call the m/c mechanic to see if he will come over the house and put my two wheels on. He the guy who Pressed in my Races and put Shims in the hub.
Tell me what you think of these pics I took today 3/28/11
HELP
I'm just spinning my front wheel. And its got LOTS OF ENDPLAY; WOBBLE call it whatever you want.
Man, I tried everything to put that front wheel on WITHOUT ENDPLAY and its just NOT HAPPENING :newsmile055:
Now I'm really screwed; got the bike on jack stands with no rear wheel either
I tried switching spacers but the both front ones are the SAME SIZE :small3d031:
That NUT on the Left Side of the wheel has been torqued to spec 55-60lbs.
I've taken the front wheel off so many times to try an figure out what heck I'm doing wrong. And I can SEE IT. That GAP won't go away.
If I puch the speedp side to right; it all looks good where the speed is. However, upon doing that I look over on the Left Side of the wheel that there's a LARGE GAP.
There's one picture there where the speedometer was hook-up correctly - THAT'S BEFORE i TAKE IT APART FOR THE NEW TIRE TO GO ON - I should've left it alone.
Now I got to call the m/c mechanic to see if he will come over the house and put my two wheels on. He the guy who Pressed in my Races and put Shims in the hub.
Tell me what you think of these pics I took today 3/28/11
HELP