ironmark
Junior Member
The right handle bar wires going to the switch assembly were pinched over a year ago & I have been having problems with the bike ever sense . The bike will run fine @ low or medium throttle but when I get on the throttle over 3/4 of the way the bike will shut down and go into the limp home mode , it will not do it all the time . The problem has been getting worse so I replaced the entire right hand wires & switch assembly . I replaced the wires & switch assembly because when ever the bike shut down I would remove the right switch assembly and wiggle the wires a the codes would clear . The bike is still shutting down so now I am lost and I dont have any idea what the problem could be . I am considering taking the bike to the dealer ( HD mechanic pinch the wires ) because now they can not use the wires as a problem , so even if I cleared the codes would the dealer be able to access the computer & pull up the past codes ? Also would a problem with the security system cause this kind of problem ? everytime I ride the bike I can not ride I have to baby it & I can not go far for fear of being stuck on the side of the road ( happened a few weeks ago ) I am getting pretty frustrated .