I have a question regarding Mikuni choke.
When you use original HD choke it can be full open or ½ position open. When you start bike after 15-30 min initial warm up you should ride about 3 min with full open position of choke knob, than you should set ½ position and run next 2 minutes and than you can close knob fully in.
What with the Mikuni choke cable. I think that there is only one position so you can have just open choke or close? Am I right or only my Mikuni cable is strange.
And last question. What rpm do yoy have during choke use. When you have normal operating temp the rpm should be 1000-1050. But when you start a bike and you have choke knob open what rpm engine has? And what rpm engine has when is a little bit warm before you close the choke knob.
Sorry for so many questions. I try to set all to be sure that is correct.
Best regards, Piotr
When you use original HD choke it can be full open or ½ position open. When you start bike after 15-30 min initial warm up you should ride about 3 min with full open position of choke knob, than you should set ½ position and run next 2 minutes and than you can close knob fully in.
What with the Mikuni choke cable. I think that there is only one position so you can have just open choke or close? Am I right or only my Mikuni cable is strange.
And last question. What rpm do yoy have during choke use. When you have normal operating temp the rpm should be 1000-1050. But when you start a bike and you have choke knob open what rpm engine has? And what rpm engine has when is a little bit warm before you close the choke knob.
Sorry for so many questions. I try to set all to be sure that is correct.
Best regards, Piotr