Hello Guys,
I'm a frequent lurker and haven't posted before. I've spent a lot of time reading here. Now, I've got a problem.
When I bought my 09' Ultra I had the dealer install a HD oil temp gauge. I have now decided to add a HD Premium Oil Cooler. So, when I now go to install the new Oil Cooler adapter plate, I find that the dealer has installed my oil temp gauge sending unit to an identical appearing adapter plate all ready mounted. Obviously the sending unit has to be moved and I need suggestions for an alternate location to install the temp gauge sending unit.
I traced out the wiring and the isn't enough slack to route to the oil pan drain area. Wondering if I could install a "Tee" from the right or left outlet on the new oil cooler adapter plate. Posted this on another forum and recommendations were all to go to the oil pan. Wondering about any alternative suggestions from you knowledgeable wrenches. Thanks all.
I'm a frequent lurker and haven't posted before. I've spent a lot of time reading here. Now, I've got a problem.
When I bought my 09' Ultra I had the dealer install a HD oil temp gauge. I have now decided to add a HD Premium Oil Cooler. So, when I now go to install the new Oil Cooler adapter plate, I find that the dealer has installed my oil temp gauge sending unit to an identical appearing adapter plate all ready mounted. Obviously the sending unit has to be moved and I need suggestions for an alternate location to install the temp gauge sending unit.
I traced out the wiring and the isn't enough slack to route to the oil pan drain area. Wondering if I could install a "Tee" from the right or left outlet on the new oil cooler adapter plate. Posted this on another forum and recommendations were all to go to the oil pan. Wondering about any alternative suggestions from you knowledgeable wrenches. Thanks all.