GeauxTigers1
New Member
Folks, I have a 2011 FLSTC with DTC B2119, Fuel Pump Output Overload. Manual states B2119 will set if the fuel pump circuit draws more than 6 amps or when the fuel pump has been run dry. I did get down to 50 miles reserve before adding fuel. However, even then I have no fuel pump whir sound when I turn ING ON. There is sufficient fuel in the tank and I've performed the #2 Fuel Pump Test: Disconnected fuel pump at the harness; cleared the DTC; turned ING ON and the code did not reappear. However, after reconnecting the fuel pump harness, the DTC returns. Should I conclude the fuel pump needs to be replaced?