I have a sound that happens very rarely down in my primary. It sounds exactly like 2 metal discs sliding together. The sound only happens when I start off. It happened 8 months ago and then nothing until just recently. But only once. Its not a continued sound with every time I start off from a stand still. Now before anyone jumps in there with an answer. I had installed a new clutch. New metal discs and new fiber discs. I had obtained the clutch kit that has extra fiber and metal discs that eliminates the riveted spacer HD puts in from the factory.
I installed the discs the correct way. Even the furthest in disc is fiber. Meaning its not metal to metal on the back wall of the clutch housing. It has been mentioned to me that the throw-out washer may be bad or on its way out. There's also a tiny bearing that is next to this throw-out washer on the end of the clutch rod. Is the throw-out bearing causing this noise? The tranny is a 1993 HD 5 speed.
zoood/RJ
I installed the discs the correct way. Even the furthest in disc is fiber. Meaning its not metal to metal on the back wall of the clutch housing. It has been mentioned to me that the throw-out washer may be bad or on its way out. There's also a tiny bearing that is next to this throw-out washer on the end of the clutch rod. Is the throw-out bearing causing this noise? The tranny is a 1993 HD 5 speed.
zoood/RJ