How to tell if ECM is set stock

[Twinkie07]

Doesn't the fuel pak have a usb cable and software for your computer that will show you your current sensors?

Not the FuelPak I have. the FP3 uses USB

 

[Dan.1977P]

Looks like you have a reason to buy one of these!
Spun Aluminum Face Tachometer | Speedometers & Tachometers | Official Harley-Davidson Online Store
Absolute rip off from HD as you can find similar ones way cheaper that work just the same. Also, it's a tach and unless you are new to a manual transmission, I don't see the point.

 

[cdn-bigfoot]

I have a 2006 Streetbob. I wasn't aware they had a rev limiter.
Am I to believe that the stock rev limiter is set to 5200 and a simple download to the ECM allows the engine to rev to 6200?

I have the new Spun face speedo with tach so may check this out.

Thanks for the new info.
CDN BF

 

[Jack Klarich]

I have a 2006 Streetbob. I wasn't aware they had a rev limiter.
Am I to believe that the stock rev limiter is set to 5200 and a simple download to the ECM allows the engine to rev to 6200?

I have the new Spun face speedo with tach so may check this out.

Thanks for the new info.
CDN BF

That is correct, but alas even with this down load the bike will still be to lean to appease the EPA

 

[Twinkie07]

I got my problem lined out.Talked to Vance&Hines rep and put in the map that he recommended.
Runs great better power and better sound..

 

[Lucky Doug]

x2 on dealers having info. If you don't have the download don't waste your money on it. Get up with Superchips and step up your ECU for less money. No, I don't work for the them, I am just a cheap (EDIT) .


Please read this...

HDTimeline Language Policy - Harley Davidson Community