glimmerman
Active Member
noticed last month the 01 rk had a lot of travel on the front brake. not using it too much but did notice i had maybe 3/8-5/16 space before the grip. bled out brakes with a hose on the fitting and a jar to catch the fluid. very dark yellow. bled about 2 res. full per side. felt fine and had maybe 3/4-1/2 inch space when done. pads have about 12k on them and 3/16 inch showing. after 2 hrs. went to put bike away and no front brakes. didn't do a test run because of the heat today. any suggestions would be helpful. now why does 11 oz. of dot 5 cost 9.99 and 32 oz. of dot 4 cost like 3.00? only in america.