Dyno At Biketoberfest

[Daveg09]

Just thought I'd let ya know how the '09 1200C did on the dyno. Bike is stock except for the stock exhaust being drilled out with an 1 1/4" hole saw. Got 71+ H.P. and 73+ Lbs. of torque. Fuel Air ratios were good. Guess you can't ask for more than that from an almost stock bike. Had a blast tons of stuff to do and goodies to look at. Later guys.

 

[Jeff Klarich]

Respectable numbers.

 

[HDDon]

Those are just a few points higher than stock numbers. JMO but you could see better numbers if you opened the air flow with a free flowing AC and some type of fueler. Your bike is probably running a little lean due to the factory settings and opening the exhaust.