My right side directionals are not functioning. I am using the doss minis front and rear with a badlands load equalizer. They worked fine for years and recently stopped working on the right side. I performed the tests per the service manual (rather vaguely worded because it says to remove the self canceling module and test the module at the pins? But to actually do the test you are testing the pin holes on the wiring harness plug. So how does this tell me if the module is bad. Did I not interpret this correctly. Like I indicated it is poorly worded. As far as the handlebar swith and directionals on right and left side they all tested with voltage and when jumping the pins at the wire harness plug to light up the front and rear at the same time that all worked. So does this tell me the self cancel module is bad? How is the module actually tested so I know it is the problem?