nascar7613
Active Member
2009 Street Glide. Seems like the clutch is not disengaging completely. The clutch starts engaging right off the grip, less then half an inch, can't get neutral with bike running from 1st gear, if I'm real careful I can find neutral from 2nd. Took the clutch discs out, they were gummed up and sticking together. Put in new clutch discs, both friction and steel, cleaned all the gummy crap from inside the clutch basket, backed off the clutch cable all the way, turned the adjustment screw out then in until resistance then backed off half a turn, adjusted cable until less then eighth of an inch freeplay, and the clutch basically acts the same. What else would cause the clutch not to fully disengage?