Strange Love
New Member
Hi Ya'll, I have a 66 FLH Electra Glide Shovel, after a couple of years of lugging around, I did a lot of motor work, carburation and gear ratio changes. Which resulted in clutch slippage. I have a mouse trap, I did multiple adjustments, didn't help. Finally, I replaced the clutch hub with a 5 stud hub, the plates with Barnets, the pressure plate with the thick aluminum one and after multiple mouse trap adjustments slippage problem solved. But the clutch leverer was so hard to pull that my left forearm looked like Popeye's. I didn't mind then, as long as I could go fast and kick ass, I was a young buck then. Now I am a 78 year old schooler. Fresh motor and trans rebuilt. I replaced the thick aluminum pressure plate with the thin metal one and new springs. The clutch leveler handle is still hard to pull. My question is if I replace the 5 stud clutch hub with the stock 3 stud hub how much better will the pull be percent wise? (Without replacing it with a terminator clutch kit). Thank you