renegadecoupe
New Member
recently bought the bike and was laid down..i replace all parts broken now have a bad electrical issue is you can help..
this is what i have already done..
1.replaced coil,plugs and wires.
2.replaced crank sensor
3.replaced tsm and redone learn process
4.replaced tssm and keyfob didn't work either
5.checked all fuses,and relay.
6.tested with meter all conections more than two times over the whole bike..
7.checked fuel tank,vacuum hose for cracks,etc..
bike will turn over,and over and over but no fire...funny thing is it has fire between coil wire and plug with tester but will not fire the plug..have changed plugs several times and gapped..what is wrong with this thing..
this is what i have already done..
1.replaced coil,plugs and wires.
2.replaced crank sensor
3.replaced tsm and redone learn process
4.replaced tssm and keyfob didn't work either
5.checked all fuses,and relay.
6.tested with meter all conections more than two times over the whole bike..
7.checked fuel tank,vacuum hose for cracks,etc..
bike will turn over,and over and over but no fire...funny thing is it has fire between coil wire and plug with tester but will not fire the plug..have changed plugs several times and gapped..what is wrong with this thing..
Last edited by a moderator: