I have a 2009 Road King Classic and purchased 16 inch Apes and Barnett extension wires and sensor extension. After re-pining with the extensions and trying to push the wires through the 11/4 inch bars it was obvious that the harness would not go through the bars because the extension should have been staggered and the cutout in the bars larger. Plugged in the harness to check lights all worked except the head light and spots. I re check the pins on the left side. I had the blue and black wire in the wrong spot changed the wires plugged it back in checked light all worked. After putting the bike together and starting it up and going through the check again. The signal lights do not blink, horn not working and cruise light does not come on. I pulled the manual and check the color coding against what I had drawn out and it was the same. All were working before putting the bike back. Wonder if the pin's are not contacting in the female plug. I checked fuses and none are broken. Anyone have an ideal.