Mavagrand
Senior Member
just finished my 15000 service. One question, clutch adjustment pretty much went by the book except when I went to adjust jam nut/clutch adjustment screw, it backed out a lot more than the one turn recommended in the book. I backed it back down until the adjustment nut made light contact with the clutch but not sure how deep the interior adjustment (hex screw) is supposed to be set. both were tight and I test rode the bike, it seemed fine, no slipping or dragging. anything I should listen for if the clutch is adjusted wrong?? I suspect as bike warms up there may be something come up. Is there a way to be sure the clutch is right??