Hi, I've tried this on a couple of other forums.
This is a 2009 ultra classic.
When I switched to Redline tranny lube I removed 1 quart (32oz) of old fluid. I put 1 quart of redline in. According to the manual you have the bike on the kick stand remove the dip stick, wipe clean reinsert it without screwing it in. The level should be between the full and add mark.
With my bike, the level doesn't even show on the dip stick. If I screw it all the way in it will register between the end of the stick and the add mark.
Something is wrong here, either the dip stick is to short or the specified level (32 oz) is not enough or the tranny should be checked with the bike upright (like a 5 speed EVO) or the level should be checked with the tranny hot.
Anyone have any insight to this?
Craig
This is a 2009 ultra classic.
When I switched to Redline tranny lube I removed 1 quart (32oz) of old fluid. I put 1 quart of redline in. According to the manual you have the bike on the kick stand remove the dip stick, wipe clean reinsert it without screwing it in. The level should be between the full and add mark.
With my bike, the level doesn't even show on the dip stick. If I screw it all the way in it will register between the end of the stick and the add mark.
Something is wrong here, either the dip stick is to short or the specified level (32 oz) is not enough or the tranny should be checked with the bike upright (like a 5 speed EVO) or the level should be checked with the tranny hot.
Anyone have any insight to this?
Craig