My 09 1200 C "claks" into gear. I've been told this is normal for sportys but I am wondering if it's not a tranny problem.
*******************************Just an insight on the CLANK..
Think about the Gears and primary chain Turning at idle speed....
Than take it a step further, squeeze in the clutch,all the way against the handlebar.
Now HOLD it there, counting to 5 or so.. THIS ON a cold bike should Normally Break loose the tight parts(clutch plates) to NOT SPIN and dis-engage the Movement...
When all is stopped NO Clunk.
Using my bike as an example; 09 FLHR, I Need my clutch adjusted while COLD (under derby cover) ..
This clutch adjustment is very important in the CLUNK or No Clunk..
also the clearance of the cable at the clutch handle is another. 1/16 Min. to 1/8 inch Max.
Check out my adjustment as it applies to all HD's of the later years, EVO's and TC.
BUBBIES Clutch Adjustment -
Harley Davidson Community
Hope this helps
signed....BUBBIE