skinautique1993
New Member
Battery on tender, when I went to start it for my first ride this season, nothing. I put it on the big charger for 30 minutes, fired it up and rode for 30 miles, shut it off, won't re start. I took the battery to my local dealer to have it checked, after charging all day, it had 7 CCA. OK got new battery. During installation, I noticed a draw on the battery so I started checking things, yep got one. I check between the neg. post and the neg. cable for verification. In my ski boat, I could isolate the diode trio set to duplicate the draw.
In your great article on this subject, you reference the two wire regulator during troubleshooting the system. I have a three wire regulator. Is there info on the site that would tell me the same info? Also, if I'm testing the system for draw, and I unplug the regulator and the draw goes away, does that tell me anything besides the regulator is unplugged.
Thanks for any help you may have.
Gary
In your great article on this subject, you reference the two wire regulator during troubleshooting the system. I have a three wire regulator. Is there info on the site that would tell me the same info? Also, if I'm testing the system for draw, and I unplug the regulator and the draw goes away, does that tell me anything besides the regulator is unplugged.
Thanks for any help you may have.
Gary