Rear turn signal relocation

Discussion in 'Softail Models' started by FXSTC 97, Sep 1, 2015.

  1. FXSTC 97

    FXSTC 97 New Member

    New to the site and first post/question :D. I have a 1997 FXSTC. The previous owner relocated the rear turn signals, I guess to accept saddlebags. I have been racking my head and searching online for something to put were the factory turn signals were located. I am looking for some suggestions. Thanx in advance.
  2. Breeze3at

    Breeze3at Well-Known Member

    You want to fill the holes in the fender struts? Look on Ebay for "air cleaner cover bolts, license plate bolts, etc. You should be able to find something that fits your style. Make sure they are long enough. Note; most will be 1/4" bolts, I think t.s. bolts are 5/16".
  3. PA 58

    PA 58 Active Member

    go down to ace hardware and get you some plastic plugs. they come in all kinda sizes and shapes:D
  4. Jack Klarich

    Jack Klarich Guest

    You can find chrome or stainless push in plugs @ any good hardware store to fill the bolt holes