Old guy very moded Evo

Discussion in 'New Member Introduction' started by thumper 549, May 8, 2019.

  1. thumper 549

    thumper 549 Member

    5
    1
    0
    I have bought tools from George and just noticed he has a forum !
    I have tried other forums -hoping here there is more knowledge then BS.
     
  2. joel

    joel Senior Member

    1,379
    83
    249
    Welcome from Spokane Wa.
    Hopefully you'll find the people here to be helpful with any questions you have.
     
  3. Jeff Klarich

    Jeff Klarich Experienced Member Contributor

    5,369
    183
    633
    Welcome to HDT from sunny AZ. I think you'll like it here.
     
  4. thumper 549

    thumper 549 Member

    5
    1
    0
    Thanx !
    been to AZ many times I like the many climates.
    Spokane
    well, there is not much better riding anywhere desert, mountains, Winthrop and Cascade is about as great as it gets.
    plus Idaho is a land of pretty too!
    I am always looking for ways to get this engine faster in a usable RPM configuration.
    looking fwd to seeing what you guys are doing.
     
  5. Harttoo

    Harttoo Well-Known Member

    2,725
    103
    254
    Welcome from Wisconsin.
     
  6. liquid_wrench

    liquid_wrench Junior Member Contributor

    576
    53
    127
    Welcome From Ohio
     
  7. Joyflyin

    Joyflyin Experienced Member Staff Member Moderator

    5,984
    133
    240
    Welcome aboard, glad to have you here!
     
  8. thumper 549

    thumper 549 Member

    5
    1
    0
    Thanx
    Bolted the heads on today and after many measurements
    custom made base gskt to raise the jugs 0.006, for some reason the squish STILL came out at 0.026 at one tight point both pistons
    It is nice to know Cometic will make you anything!
    I dont think the ceramic took up more than a tenth of a thou but I ost some distance.
    The only thing i can think of is variations in gaskets thickness per batch?
    I am going with it!
     
  9. gator508

    gator508 Well-Known Member

    3,119
    103
    332
    Welcome from Gulf Coast AL
     
  10. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,946
    153
    327
    Welcome to the forum from Scotland

    Brian