Hi all! I have a 92 hd sportster xl1200. I recently bought chrome housing and new controls. I got the new controls off of a 98 HD 1200s. My problem is I cant seem to figure out the right turn and front brake switch. My 92 has 7 wires from each control side the 98 has 6. I dont know what is the extra wire and where it goes.
Everything seems to be working as far as run/stop, start, high and low beam I have the wiring diagram for each but im doing something wrong. Here are the wires.
98 1200c
RIGHT SIDE
Front Brake -----red/yellow and white/black
Starter Switch---black/red and white/black
Stop/Run---------
Right Turn--------orange/white and white/brown
LEFT SIDE
High/Low--------blue and yellow and white
Horn -------------orange/white and yellow/black
Left turn---------white/purple and ?
93 1200XL
RIGHT SIDE
Front Brake------red and orange
Starter Switch--black and white
Stop/Run -------gray
Right Turn-------brown and green
LEFT SIDE
High/Low-------blue and yellow and white
Horn-------------orange and black
Left Turn--------green and purple
Everything seems to be working as far as run/stop, start, high and low beam I have the wiring diagram for each but im doing something wrong. Here are the wires.
98 1200c
RIGHT SIDE
Front Brake -----red/yellow and white/black
Starter Switch---black/red and white/black
Stop/Run---------
Right Turn--------orange/white and white/brown
LEFT SIDE
High/Low--------blue and yellow and white
Horn -------------orange/white and yellow/black
Left turn---------white/purple and ?
93 1200XL
RIGHT SIDE
Front Brake------red and orange
Starter Switch--black and white
Stop/Run -------gray
Right Turn-------brown and green
LEFT SIDE
High/Low-------blue and yellow and white
Horn-------------orange and black
Left Turn--------green and purple