barttoday
Active Member
Got my bike back from the dyno today. Here's the numbers and specs. I'm a little disappointed with my HP numbers, but that's the trade b/w the low down torque, and I havent done any headwork yet.
S&S 106" Jugs/Flat Top Pistons 10:1 CR
S&S 551 Easy Start Cams
SE Stage 1 A/F
Samson Cholo longtail true duals
SERT Supertuner
Torque 113 lb-ft from 2500 RPM to about 4400 RPM then drops off (Easily pulls front tire off of the ground!!! and sticks my backside into the backrest)
82 HP from about 2600 RPM up to about 5500RPM then tails off.
I'll post the graph once I get it scanned in.
S&S 106" Jugs/Flat Top Pistons 10:1 CR
S&S 551 Easy Start Cams
SE Stage 1 A/F
Samson Cholo longtail true duals
SERT Supertuner
Torque 113 lb-ft from 2500 RPM to about 4400 RPM then drops off (Easily pulls front tire off of the ground!!! and sticks my backside into the backrest)
82 HP from about 2600 RPM up to about 5500RPM then tails off.
I'll post the graph once I get it scanned in.