astrorock
Member
Hay guys, it's been a while.. i just rebuilt my cv carb and removed the mixture screw to clean the carbon off of it.. i forgot to count the number of turns before i took it out. i have followed the recommended instructions to turn the screw it in till it bottoms out and then back it out 2.5 turns.. then ran the bike, (they say to turn it in while it's running until the idle changes then back it out till the idle changes and find somewhere in the middle) the problem is that i can turn it in all the way and nothing much changes!! the idle gets rougher a little but not much... the bike runs ok, and it pulls, but just seems to be a little rougher and doesn't pull quite as hard as it used to.. i also noticed a little verry, verry light mist or smoke out or the exhaust on the front cylinder.