front master cylinder

Discussion in 'Sportster Models' started by bikecurious, Oct 23, 2010.

  1. bikecurious

    bikecurious Member

    Hey guys,
    so I've been wanting to slim down all the stuff on my bars, and I'm looking to find a smaller front master cylinder. any that I have found have been waaaay over priced. I've thought even tearing one off of a dirtbike, but I was wondering if anyone knew of a place where I could get a simple SMALL master cylinder for a good price?
  2. Breeze3at

    Breeze3at Well-Known Member

    It's not that simple. I don't know all of the tech. stuff involved, but it has to do with master cyl. piston size, line size, disc diameter, caliper pistons etc. If you were to use a dirt bike m.c., you might have to have a gorilla to squeeze the lever. I could be wrong.:34:
  3. Hoople

    Hoople Account Removed

    Breeze is correct. Unless you do the math, you could be headed down the road of big problems and trouble. On the surface it looks like a simple thing to do but it is not.
  4. Jack Klarich

    Jack Klarich Guest

    Does not matter what you ride or how you ride you want to be able to stop and stop good, best to do alot of research and get it right the first time, may be contact some one at PM Brakes and Wheels Performance Machine
    Capital Jack