My 2001 Fatboy has a screaming eagle motor only firing on one cylinder. When I pull the back plug wire off and hold it 1/4" away, it fires on both cylinders, but when I put the plug wire back on, it only hits on one cylinder. While holding the back plug wire, it will bite me depending on how I am holding it. Nothing consistent, just depends on how I'm twisting it.
Makes me wonder if it's a bad plug wire or not. It runs fine with the plug held off, but quits when I snap the plug wire on. Any suggestions are welcome, and helpful.
Thanks,
GCRIV
Makes me wonder if it's a bad plug wire or not. It runs fine with the plug held off, but quits when I snap the plug wire on. Any suggestions are welcome, and helpful.
Thanks,
GCRIV