BRAKE LIGHTS

[royston]

ha all, i have 1200t. 2015
the problem i have is the front and back brake will not light the brake light
it's not the bulb,or brake switches or fuses
any ideas

 

[Justjake]

For a start run a scan on your ECM, this should tell us where the problem is

See this link on how to scan for codes, the instructions are near the bottom

https://wilkinsharley.com/checking-trouble-codes-harley-davidson

 

[Roadking-1960]

Dont know if your bike has a brakelight-relay . If so this could be bad , check this first ,if rest is Ok ,like you said !.

good luck

 

[joel]

Get a wire schematic for the BCM and check the brake switch circuit to confirm power , grounds, brake switches input signals and output signal

 

[Roadking-1960]

2015 1200Thas a canbus , first you have to check input brake on F3 , if OK ,then check K3.

good luck

 

[Roadking-1960]

Probably solved !!!