I need two 1"axle diameter front rim hub bearing with a outside dimension of 1.781 is this possible? I have a 08 FXSTBI and an aftermarket rim, my axle is a 1" the bearings in the front rim im trying to put on are 3/4 if I could get a bearing 1" axle and 1.781 outside diameter.This would solve my problem.I have tried the a 3/4 axle but some venders would not give me any decent dimensions.I have all the dimensions too.any Info would be greatly appreciated.thank you and Merry Christmas.
======================================================
HI I have an aftermarket aluminum rim with 3/4 axle bearings. I have a 1"axle on my 2008 night train.The bearing holes are 1.781=45.237mm Does anyone make a bearing 25mmx45.237x12-15mm??????? so that I can install it on my night train. I have all the axle dimensions.nothing seems to posibly cross if I was to go to a 3/4 axle.Thanks for any help H.D talking
======================================================
HI I have an aftermarket aluminum rim with 3/4 axle bearings. I have a 1"axle on my 2008 night train.The bearing holes are 1.781=45.237mm Does anyone make a bearing 25mmx45.237x12-15mm??????? so that I can install it on my night train. I have all the axle dimensions.nothing seems to posibly cross if I was to go to a 3/4 axle.Thanks for any help H.D talking
Last edited by a moderator: