I have an '06 Softftail Springer Classic with auxiliary headlight kit. Both those lamps have stopped working, although the main headlight works. Here's what I've done: grounded a circuit tester to the negative battery post & stuck the wand (don't know the terminology) in the splicing clip on the side of the single wire that runs under the tank and splices into the 2 wires that run to the lamps. The circuit-tester light goes on. Can't tell if wand goes deep enough to touch the two wires on the other side of the clip, but the light doesn't go on. When I remove lamps, attach the circuit tester alligator clip to the ground wire inside the housing and touch the wand to the positive wire-clip fastner inside the housing, circuit tester light goes on. Does this mean there's a short somewhere between the splice where the 1 wire attaches to the 2 lamp wires? What else can I do to isolate try and isolate the problem, given, as you've probably noticed, I'm no electrician? Other possibilities? I don't use an on/off switch, by the way, and the fuse and relay (brand new) are fine.
Any thoughts appreciated
Any thoughts appreciated