kenshapiro2002
Member
Re: New Stator / New VR And Only 12.6 Charging
Since I replaced the VR I guess I'll check that ground first. I'll check the stator too. The stator puts out AC, not DC ? I'll check that tomorrow. Once I start her, I can unplug the VR from the stator to check it?
Check your grounds. Take off and wire brush both ends of both battery cables. Then make sure that the VR is getting a good ground. That VR is grounded through the mounting hardware, right?
Check that the Stator is putting out 16-20 Vac/1000 rpm. You can do this with a DVOM across the posts in the plug coming out of the Primary.
TQ
Since I replaced the VR I guess I'll check that ground first. I'll check the stator too. The stator puts out AC, not DC ? I'll check that tomorrow. Once I start her, I can unplug the VR from the stator to check it?