I have a 2001 custom chopper that I have built and installed a 2001 Dyna twin cam motor in it. I removed all components except what I need to make it run. 3 times I have rode the bike at highway speed for abut 100 - 150 miles then the bike quits running. when I check the battery it shows 11.3v and will not take a charge and is trash. In my garage I have checked the stator and all is good, I have checked the Voltage Regulator and it puts out the proper voltage, I have checked the diodes in the voltage regulator and they check good, I have checked all grounds and they are good, it does not blow fuses and there are no burned wires indicating a direct short. What am I missing? could the VR be shutting down when hot or the diodes break down when hot?
THanks
Paul
THanks
Paul