phatmike2948
Member
I installed vance and hines big shot longs on my FLSTC and the naked air v02 air cleaner. I purchased the race tun version of the screaming eagle super tuner and I am trying to get my bike running. Whats driving me nuts is they don't seem to have any stage 1 maps for the 2012 model....
I used filed 357SDR001.dt0 which is the following:
application 2012 softail/dyna
configuration: -1580 SE A/C & Race Exhaust
Components: -SE Air Cleaner and Breather Kit P/N 29440-99D
-race exhaust
-acr disabled
This is the only one of the stored calibrations that does not say stage 2 or stage 4 or whatever. In fact its the only configuration that doesn't have bore or something like that done to engine that I have options for. I can tell my pipes are running hot for sure and I am getting a ton of pop when I let go of the throttle especially if I am downshifting/engine breaking.
I have done 2 records of data and did a little bit of smart tuning but I have not touched any values outside of the front and rear cylinders. I am new to tuning like this but I did buy the training DVD and watched it from start to finish and I am a programmer used to tables and graphs so I at least know how to use the software to some degree. Any help would be AWESOME. I can attach my config if anyone is willing to help.
One of the first things I noticed is that the map seems be to be for a 1580 not a 1690 engine which I have? Also, i installed the quite baffles as well if that makes a difference which I think it does.
I used filed 357SDR001.dt0 which is the following:
application 2012 softail/dyna
configuration: -1580 SE A/C & Race Exhaust
Components: -SE Air Cleaner and Breather Kit P/N 29440-99D
-race exhaust
-acr disabled
This is the only one of the stored calibrations that does not say stage 2 or stage 4 or whatever. In fact its the only configuration that doesn't have bore or something like that done to engine that I have options for. I can tell my pipes are running hot for sure and I am getting a ton of pop when I let go of the throttle especially if I am downshifting/engine breaking.
I have done 2 records of data and did a little bit of smart tuning but I have not touched any values outside of the front and rear cylinders. I am new to tuning like this but I did buy the training DVD and watched it from start to finish and I am a programmer used to tables and graphs so I at least know how to use the software to some degree. Any help would be AWESOME. I can attach my config if anyone is willing to help.
One of the first things I noticed is that the map seems be to be for a 1580 not a 1690 engine which I have? Also, i installed the quite baffles as well if that makes a difference which I think it does.
Last edited by a moderator: