First off - Thanks to Ultrat for sending me in this direction.
I have a duecee of a problem with my 2008 Softail Deluxe. Bike was parked for over a year(started a few times- did not ride). I attempted to start it a couple of weeks ago and the battery was completly died. I purchased one form a local parts store since the dealer was already closed. The CCA's are compatable to the original with 310CCA's. Came home and installed the battery with no success regarding the bike starting and running.
I then replaced the batteries to the FOB's as one of them would allow the bike to crank but the other did not.
With the bike now cranking, I noticed, the fuel pump would not prime(took it out and bench tested as well).
After a few days, I ordered and replaced the bad fuel, fuel pump, filter and for good measure the pressure regulator. Still the the bike will not start (lights working) but, does not run.
The next day while on a business trip I stopped by a local Harley dealer, and picked up injectors working off the premise that the injectors might have become clogged with the bad fuel. Installed the injectors, still the bike cranks but will not run.
As I read through some suggestions on this site I decided to replace the crank sensor, thinking that the bike is not finding TDC for injector firing. Also becuase I extracted DTC codes P0261, P0263, P0373, P1001. My thinking was, since I possible have already taken care of P0261 and P0263, then I needed to concentrate on P0373 CKS sensor. No such luck! Bike cranks, but still will not run.
I am now stumped and need help. It would help if I can find a good troubleshooting guide with a wiring schematic and values for the sensors. Or, just good plan advice of what I could have possible missed.