2005 FLHTCSE2 vibration

Discussion in 'Touring Models' started by RGlide03, Jun 21, 2011.

  1. RGlide03

    RGlide03 New Member

    Has anyone run into a problem with excessive vibration in the floorboard/frame on a 2005 Harley-Davidson FLHTCSE2?

    The front motor mount has been replaced and it still happens through the RPM range. Took it to HD and they said it may be the rear motor mount. If not that then possibly the flywheel. The bike still has plenty of power and runs well.

  2. Jack Klarich

    Jack Klarich Guest

    Check all the exhaust mounts next before you check the tranny mounts and crank run out:s