08 streetglide no ignition power after radio install

Discussion in 'Electrical' started by pmpj172, Jan 8, 2015.

  1. pmpj172

    pmpj172 New Member

    up front thanks for any help you can suggest wracking my brain on this so here it goes.....wifey bought me a radio for my 08 street glide after installing i now have no ignition power to the whole bike turn the switch and nothing there was a blown fuse witch i replaced ,switched all relays around checked all fuses in fuse box,weird part is if i back feed 12v from the radio accessories wire system comes on?bike starts runs normal?is there any other fuses on the bike that aren't in the fuse block i should be looking at
  2. dbmg

    dbmg Guest

    If you did not disconnect battery when installing radio you need to check the maxi fuse....
  3. Breeze3at

    Breeze3at Well-Known Member

    If the '08 is same as '07, t here are more fuses under the Right side cover. It's just in front of the ECM and kind of hidden with wires.
    I think the fuses in there are P&A, fuel pump and ECM.

    Welcome to the forum!