Vrod with stator wire oil leak. Does anyone have a fix?

[NezzyJohn]

I have a 2006 vrod with oil leaking thu stator wire in the primary case cover. Any fixes?

 

[Jeff Klarich]

Seems to me I read someone cleaned the area thoroughly and sealed it with a high temperature silicon.
You may find some posts on this issue in the self help section.

 

[dolt]

Jeff's solution is the common fix for this leak in Twin Cams; should work for the OP as well. Cleaning and prep is the key to a long term fix.

 

[Skipg]

Jeff's solution is the common fix for this leak in Twin Cams; should work for the OP as well. Cleaning and prep is the key to a long term fix.

I used brake cleaner to remove all oil residue and dirt. Low pressure air to dry completely and then sealed with black high temp sealant. The key is to use a small screwdriver to pull back the seal as much as possible to clean, air dry, and then force sealant into any gaps that the screwdriver allows.