free website stats program Turn signals and hazard lights work in reverse sometimes, sometimes work fine until I hit a bump | Harley Davidson Forums

Turn signals and hazard lights work in reverse sometimes, sometimes work fine until I hit a bump

ICBMpilot

New Member
OnLy 29,000 miles on 2006 ultra classic FI.

Nothing changed or done which could cause this, all stock but

I have two modes when pressing either turn signal
1. They work the way they are suppose to
Or
2. The flashers are on after hitting one of the turn signal buttons and goes off when I hit that same button.

When I hit a bump or jump on the bike the opposite happens.

IE I turn the left or right turn signal on, hit a bump or jump on bike and emergency flashers come on, yet cancel if I push the same turn signal button. If the flashers come on when pressing the LT or RT buttons and hit a bump the turn signal works.

Sometimes when the turn signal is working at a light I will see the other opposite light flash a bit then back to normal.
REPLACED THE TSM, THAT WANT IT, RAN AROUND HITTING THE BIKE, NOTHING.


Any ideas would be helpful

jC USAF VET / ICBMs/ Professional pilot
 
Never had that happen on a bike , but, had a related problem on a car with turn signals and wipers. Found the problem to be a corroded fuse box, where impulses were jumping from one relay to another. Cleaned it up everything worked fine. Just a thought.
 
Back
Top