lovemyharley03
New Member
I have LED turn signals. One light is not working, seems to be bulb but, could it be another issue?
trouble shooting my LED turn signal system
- Thread starter lovemyharley03
- Start date
I would first check to see if theres power at the bulb socket. Process of elimination, start at the source.,
J
Jack Klarich
Guest
A test light or volt meter will be a good start
D
dbmg
Guest
Are they front or rear turn signals. If on front is running light portion working?
gusotto
Junior Member
LED's are polarity sensitive.
Regular bulbs will work, no matter the polarity from the factory.
When I replaced my lights w/LED's, one side didn't work.
Even when swapping.
Then I checked the polarity at the socket.
It was reversed from the factory.
Took a little time and got the leads swapped around and then it worked.
Check the polarity!
Regular bulbs will work, no matter the polarity from the factory.
When I replaced my lights w/LED's, one side didn't work.
Even when swapping.
Then I checked the polarity at the socket.
It was reversed from the factory.
Took a little time and got the leads swapped around and then it worked.
Check the polarity!
Good to hear you figured it out, thanks for the update.