free website stats program Trans Linkage Rod Change | Harley Davidson Forums

Trans Linkage Rod Change

Bud White

Well-Known Member
Retired Moderators
Not a Hard one to do but i figures i'd snap a few pics and post it up

100_0212-1.jpg


There is the stock one .. thin ugly and has weak ball joint linkage

Remove the old one


100_0213-1.jpg


Pic of new one and old one .. Fatter Chrome and Heim joints

100_0214-1.jpg


I set the prelength the easy way

100_0215-1.jpg


now if i need to adjust some im at least in the ballpark

100_0216-1.jpg


here it is installed don't forget to loctite the bolts

Doesn't really do much other than look good and less chance of the linkage popping apart esp if you use the rear shifter

Yes that is frost on the Primary 16 Degrees today
 
I am surprised that this did something other than looks .. i had a lot of slop in the shifters and no more now its tight.. had another buddy try it out and he was surprised how tight the shifter felt
 
Back
Top