Tools recommended

[joel]

Didn't really find a good place to put this in so here it is.
Here are some tools that I recently bought to do service on my bike. And really they work like they should.
I replaced the lifters and cam bearings and also replaced the breather parts on the rocker arm plates keeping the original pushrods.
I bought the cam Bearing removal and install tools from George's garage and the dog bone torque adapter wrenches from NAPA.
The tools from George's garage are just excellent at doing what they are made for. And he is a great guy, took care of a wrong tool order without a question.
Here are a few pictures of the job.
Cam Bearing removal tool.

 

[joel]

And the installation tool
These tools are very good if your looking for doing cam Bearing replacement.

 

[joel]

Here is a picture of the puller at work

 

[joel]

And new bearings installed.

 

[joel]

The pile of parts removed, not counting the seat, tank and exhaust.

 

[joel]

Went on a 2 hr ride today with a barley pop in the middle just to see if there was any sound difference.
Still just as quiet as before, so I decided to make sure the speakers worked whe out in the counrty.
My report. Engine is quite and the speakers still do make some good sounds.

 

[TheOriginalEasyrider]

Great information and pictures! Prices look to be very attractive. No to steal your thunder but here's the link to his site: https://www.georges-garage.com/product-category/06-pres-t-cam-engine/

A cam chest upgrade is on the radar so I'm slowly acquiring the tools and knowledge to tackle this project so your posting is very timely!