Discussion in 'Touring Models' started by franka, Jul 30, 2011.
On 07 Road King I believe the rear wheel nut is 36MM am I right?
Correct. 36mm is the size for the rear axle nut. Great if you have a 36mm socket, but before you buy one and have a 1 1/2", be careful and give it a shot.
That's what is on my 08 Heritage, would imagine it to be the same.
That's the size for my '09 Heritage also... I found these sockets at Auto-zone & Pep Boys. Somewhere around $14-18. Good quality too.
My 07 FLHR has a 36 mm rear axle nut.
Sears has 36mm socket.
Pit posse axle wrench provides access to one side without muffler removal.
Posse 36mm Rear Axle Nut Wrench
And then there’s Harley’s own: PN 94695-08
Combination Axle Wrench | Genuine Motor Accessories | Harley-Davidson USA
I have the Pit posse wrench and it's a good quality wrench and worth the additional bucks IMO.
You are correct.
Glider is correct. The Pit Posse has the fitting to accept a 3/8" torque wrench so you can properly torque nut to 100 ft lbs......
i was lucky, i had a old 36mm i bought back in 1975 to remove the fan on my old volkswagon:newsmile04:
I don't mean to laugh but looking at the big dump truck in your profile pic,
36 mm seems mighty small. Welcome to the best HD forum.
im just glad i dont have to remove a tire from the cat 793, something like 60 lug nuts:cheers
Separate names with a comma.