Primary gasket kit

[TommyB17]

Had to replace main drive gear on my 2000 FXDWG. The primary gasket kit included 2 black fabric bolt hole gaskets. Anyone know where they go? Lots of bolt holes in there. Thanks.

-Tom

 

[Jack Klarich]

Look here?

 

[TommyB17]

Thanks for the diagram. Has to be #27, bolts up to posts on the inner and would be a nice fit on the tower. Appreciate it!

 

[Jack Klarich]

Thanks for the diagram. Has to be #27, bolts up to posts on the inner and would be a nice fit on the tower. Appreciate it!

 

[coopernicus]

Nobody's perfect....you're doing a fine job Jack!

 

[Jack Klarich]

Nobody's perfect....you're doing a fine job Jack!

Nope, just trying to disseminate the info to the members in a timely fashion with the best answer from my real time experience as a life long wrench, you can relive that

 

[Blue Wide Glide]

I'll bet there are a LOT of bikes out there without those two gaskets.

 

[Jack Klarich]

I'll bet there are a LOT of bikes out there without those two gaskets.

Not mine New design primary 1 1/2 inch narrower more foot room, holds 28 oz a bit cooler too