free website stats program Made my own backrest mount | Harley Davidson Forums

Made my own backrest mount

hammerhead pat

Active Member
Didn't want to spend the $230 that HD wanted so I bought a $14 piece of steel(2'' x 3/16'') and heated/beat/bent this into shape where it would line up with the slot in the stock seat on my FLHR. I used the mounting bolts that came on the bike..

DSCN0335-1.jpg
The piece bolted to the bracket is what the backrest bolts to, it also has a series of holes that give me about 3'' of height adjustment. Here it is installed after primer/paint..

DSCN0360.jpg


DSCN0360.jpg
.The 3/16'' steel has just the right balance of flex/firmness for my taste:s

This is what I wanted to show..


DSCN0355.jpg


DSCN0356.jpg
 
Last edited by a moderator:
Another reason I miss my dad's shop @ the farm...need access to metal tools/equipment. Great job + ingenuity...$aved $ome ca$h to boot!!!
 
Back
Top