Loctite here?

Discussion in 'Touring Models' started by Redman, Mar 23, 2010.

  1. Redman

    Redman Active Member

    Just installed some Rush slip ons on the 09 flhx...I am wondering if I should use loctite on the two hanger bolts on each side. Also used a bead of high temp gasket caulk on inside of slip ons before tightening up....should I use loctite on that bolt on each side. Thanks for the help.
  2. Hoople

    Hoople Account Removed

    In my opinion I don't think you can go wrong using some. You can't beat Loctite #246 for high heat or #243 for normal temp.

    You will need to use a heat gun to undo #246.
  3. Jack Klarich

    Jack Klarich Guest

    As Hoople said, and you can use anti sieze on the mufflers to aide in easier install and easy to remove
  4. Breeze3at

    Breeze3at Well-Known Member

    I installed a set of Rush slip ons with 1 1/2" baffles and "compatable" tips yesterday. I took a 45 minute ride, came home and took them off. It sounds like the bike is in a big culvert, and my seat of the pants didn't notice any performance increase over the Screamin Eagle slip ons. If the 1 1/2" are the quietest, I don't want to hear the 2 1/2" ones. :newsmile07:
    Please let us know what your opinion is sound and performance wise (what size baffles). I may have to give them another try.
    And YES, I use blue loctite on the hanger bolts.
  5. Redman

    Redman Active Member

    Thanks gents...the 2.0 baffles are great...mellow rumble at idle and not too loud during excell.