Lifter Noise

Discussion in 'Engine, Fuel and Exhaust' started by Joe2007ultra, May 19, 2012.

  1. Joe2007ultra

    Joe2007ultra Active Member

    Hi all

    Been awhile since I have been here. Ok so I have read all the issues about lifter noise on twin cam 96 and 103 engines.

    My 2010 Ultra is obviously having same problem. So is there anyone out there that has totally fixed the problem and what did you do to fix it. New Lifters? Oil brand and weight? Any info would be greatly appreciated.
  2. MeenBoss

    MeenBoss New Member

    I have found that on my Engine kit that I installed I measured the push rods threads and found them different 27 threads per inch to 29. Adjusted push rods per manual then added 2 then 3 then and finally 4 additional turns and it stoped the chatter. I have a 2010 with 113 build. Just make sure to follow the instructions in Manual for your bike. Have a mechanic friend and that helps but I did work and was not that hard. To hold covers out of your way rubber band and small paper clip work great.