Gen 3 settings

[bootlegger]

I've installed Rinehart 3 1/2" slipons, an Arlen Ness Big Sucker and some Iridium spark plugs. I've got a Dobeck EJK/Gen 3, any suggestions on settings or are the settings from Dobeck okay?

 

[bootlegger]

I forgot to add, The ECM has not been reflashed for the stage 1.

 

[DobeckTechSupport]

bootlegger,

The way your EJK unit comes pre-programmed should be the settings you'll want to run.

Those settings are: GRN-3.5, YEL-2, RED-2, GB-0.5, YB-4, RB-4.5

Most likely if you have to make any adjustments it will be with the Green-1st mode.

 

[i8mich]

I keep seeing different postings on what the pre-programmed settings are...I was told the GB should be GB-8 and now I see here it is GB-.05 ?

 

[bootlegger]

I keep seeing different postings on what the pre-programmed settings are...I was told the GB should be GB-8 and now I see here it is GB-.05 ?

I believe this is a difference between the 2009 and the 2010 models.

The EJK GEN3 for 2010 Touring models was released with Mode 4 (Green/Blue) being a RPM switch point for the Green fuel to engage. Basically targets an idle RPM to begin adding to the stock curve. The 2009 Touring models had Mode 4 being Decel fuel.