B BigG Active Member Aug 18, 2011 #1 Hello, I purchased the drive belt tesion tool to measure deflection with 10 lbs force. I do not have enough clearance to get it under the bottom of the belt. Any suggestions?
Hello, I purchased the drive belt tesion tool to measure deflection with 10 lbs force. I do not have enough clearance to get it under the bottom of the belt. Any suggestions?
G glider Veteran Member Aug 18, 2011 #2 Sometimes you have to eliminate one or both ends of the shoe on the tool. In other words shorten it up where the ends are.
Sometimes you have to eliminate one or both ends of the shoe on the tool. In other words shorten it up where the ends are.
stray dog Junior Member Aug 18, 2011 #3 Try riding your rear tire up on a 2 X 4. I do that to get my jack underneath.
B BigG Active Member Aug 18, 2011 #4 Ok thanks. I was hoping there was a safer way that I had overlooked.
