cruise control

[nascar7613]

I have a 04 SE electra. I was riding last night with the cruise on. All of the sudden, the bike started to decel. The cruise light stayed green, but the cruise would not engage. I noticed this morning when I started the bike that the cruise light was green right away without even moving the bike. The cruise still does not work. Any suggestions or advise would be appreciated.

 

[nascar7613]

I tried to pull codes but get nothing at all

 

[glider]

Was your "run/stop " switch on?

Is the brake light lit when it shouldn't be?

 

[nascar7613]

The run stop switch was probably on when I tried to pull the codes. Should it be off? The brake light works properly.

 

[glider]

Should be in the on position (run)

This is the proper diags for the cruise control. The others above are for the DTC codes.

Cruise Control Diagnostics and Codes - Harley Davidson Community

 

[nascar7613]

I went through that procedure and do not even get the 111 memory clear code.

 

[glider]

Did you follow the instructions to the "T". It should work.

Engine OFF, cruise switch OFF etc?

 

[nascar7613]

Sorry about that. Ican get the codes sometimes, but not everytime. Iwas fooling with it a couple days ago and I was getting code 122 for the first four then the 111for the last four. Then it quit flashing codes. Then when I started the bike it would flash the code once and it did that the next few times I started the bike. It's weird as hell.

 

[Fisher]

The cable does break occasionally.